Part Number: MK04HDH601
Clutch Type: Stage 1 Organic
Friction Facing: Organic
Disc Diameter (mm): 240
Sprung Centre:  Yes
Torque at Flywheel: 520 lb-ft / 700 Nm
Torque at Wheels: 420 lb-ft / 560 Nm

The Stage 1 Organic clutch incorporates friction material with high heat-resistance properties and high strength fibres making it an ideal clutch for street, circuit or drifting.


Single Series clutch covers are designed to achieve a clamping load that is approximately 40% higher than the genuine part enabling a higher torque capacity. Ductile material is used for all pressure plates and high burst strength can be achieved in all temperature ranges.


An asbestos free friction facing is used which has high heat resistance and high burst strength characteristics. No steel back is required which can cause RPM „lock-out“ and/or synchro damage. Superior in shift operations and half-engagement feel, this clutch disc is recommended for any motorsport or modified vehicle use.


  • Ensures the clutch engagement feeling is the same as the standard clutch.
  • Up to a 30% increase in torque capacity over standard.
  • Approximately 40% higher clamp load than the standard clutch.
  • Industry leading performance friction, achieving the highest fade recovery, the highest RPM burst test results, the best heat resistance and the lowest wear rate in the performance aftermarket.*


Street Modified / Track day / Circuit Racing / Drift

*This test was conducted by EXEDY using randomly selected competitor frictions for comparison.